Spend money on a ready-made router table top in case you wish to cut back on time frame in addition to making things easier. Get a laminated top for your router table. Also get channel guides and a miter gauge. Build a large table that is at least 24 x 32 inches. It is going to offer you plenty of space to perform your jobs.
Tape or clamp the template to 3/4″ plywood or MDF. Put the bearing on the inlay kit. Then router the 3/4″ Plywood (MDF). You have an exact copy of your insert plate. You can put the insert plate anywhere that you want. By using a different template guide, you can cut the 1/2″ ledge to support the insert plate. Simple!
You will be drilling 8 holes evenly spaced around the rail, these holes should be 1 1/8″ in from the inside edge of the rail. Using a ¾ ” spade drill bit, drill 8 holes to a depth of ½ ” – ¾ “. Using a 5/16” wood drill bit, drill through the remaining depth of the rail and through the table.
These are 5 Essential Woodshop Projects for your router that I suggest you get to making. After you have these than you are ready to tackle some of the more interesting projects and I have over 16,000 plans and blueprints if you are interested.
1. A Proven Woodworking Table Plan
Warranties are a great way to provide peace of mind. They vary according to manufacturers, with only a single year offered from Bosch, Porter-Cable and Triton with two for Skil and three for DeWalt and Festool. Leading the way at five years is Hitachi and Milwaukee – but of course these brands are also typically more expensive. A good warranty should be a consideration but not the only criteria. After all if you can afford two routers for the price of one with twice the warranty does it really make sense to bet that you will need the warranty?
For a decorative look you should utilize a hardwood, there are many hardwoods with totally different grain patterns such as mahogany, walnut, and teak. You can also use a softwood similar to pine or cedar with a stain and clear coat, or primer and paint.
“What kind of wood ought I use for my table?” The answer to this is – it depends. What kind of finish do you need on your table? In which location is it going to be used? How often is it going to be used? What’s it going to be used for.
Some routers have a toggle type switch, so it is important to verify it is in the off position, before plugging it in. It is also important to hold a router with both hands when turning it on, as the torque in these tools can cause you to lose control of it, or have it come into contact with your body. Therefore it is best to have the router held flat onto the work surface, with the bit not coming into contact with the board, and then turning it on. Then gently bring it into contact with the work piece.