How to make a wooden WC Roll Holder for spare toilet rolls

Make or get your personal Great Toilet Roll Holders for your Bathroom

Ever been caught quick with an empty toilet roll in your hands, now’s the likelihood to pull that last sheet and sit comfortably in the information that there are spare rolls to hand in your bathroom.

This report not only can make recommendations for some excellent choices but also gives the DIY enthusiast ideas on how to merely and swiftly make one for minor expense from a spare bit of wood and a broom deal with with a capacity to hold up to four spare toilet rolls so in no way yet again will you be caught quick even though considering life’s mysteries.

All photographs in this post had been taken by me.

Most men and women preserve a single spare toilet roll in their bathroom, but in a busy home it is so easy to not recognize that the last roll has been utilised until it truly is also late.

For that reason, usually on the lookout for small jobs that can make huge enhancements to home lifestyle with no also a lot price or time, and even though pondering what use I could make of an outdated broom take care of, it occurred to me that 1 broom handle and a bit of floorboard would make an excellent blend as a basis for a toilet roll holder that could hold up to four spare toilet rolls.

Hence the birth of this DIY Venture for a wooden WC Roll Holder as described below. The advantage of acquiring or making a spare toilet roll holder of this style is that it sits on the floor out of the way in a corner of the bathroom just behind the toilet and nevertheless be to hand when, in an emergency, it is necessary.

An substitute layout, with a bit of imagination, and provided there’s area which could be the situation in bigger bathrooms, would be to make a little wall hanging bookcase type style (small shelves) from wood exactly where you could hold spare toilet rolls the shelves could also then be used for keeping other useful bathroom equipment that usually clutter up the cupboard underneath the sink, this kind of as spare soaps, shower gel and shampoos.

The advantage of making it from wood, and employing scraps bits of wood, is that wood is simple to function with (effectively within the grasp of most DIY lovers), is inexpensive to make, can be finished to match any décor (painted, wood stained or varnished) and is very resilient.

I make a stage of saving scrap wood for long term DIY projects. I usually use pine floorboards as a raw material in DIY projects and any offcuts longer than one foot (30cm) are saved for potential use which in this situation is a scrap piece of pine floorboard as a base for a WC roll holder.

The floorboards I use is new wood offcuts leftover from earlier DIY woodworking projects, but if you have a very good belt sander salvaging previous floorboards or buying salvaged floorboards from a reclamation yard would supply a valuable supply of raw materials for a broad variety of progressive DIY tasks. If you do use previous floorboards as properly as ensuring it truly is de-nailed you’ll also want to check out it completely for any indicator of woodworm and if you happen to be not positive then treat it well with woodworm killer.

As with the broom handle, when the brush to an previous broom had its day I just threw the brush away and stored the wooden deal with as a beneficial piece of scrap wood which for this DIY venture proved just the ideal resolution.

Beneath are the supplies, tools and phase by step guide for creating a toilet roll holder for holding up to 4 spare toilet rolls so that you ought to in no way run out of toilet paper when most needed.

Supplies
Scrap piece of wood six inches (150mm) square
Wooden Broom Take care of

Equipment
Tape Measure
Pencil
Saw
Jig noticed
Router
Electrical drill
Saw Hole bit
Wood glue
Sandpaper
Paintbrush
Varnish or paint

Stage by phase guidebook
i. Mark out a circle on a piece of wood about 6 inches in diameter. A paint tin was utilized In this example as the template to draw a circle around the base of the tin with a pencil on a spare piece of pine wood floorboard.

ii. Cut out the marked circle with a jig noticed.

iii. Route a decorative edge close to the wood circle using the router bit of your decision to your preferred decorative finish. Routing a circle of wood this modest may possibly appear a minor hard but one particular selection to make it basic is to temporarily screw it to a more substantial piece of wood and clamp that to your workbench, router about half or a third of the wood circle ahead of repositioning the wood so that you can comfortably router the rest of the circle.

iv. Using a noticed hole bit the identical diameter as the broom manage drill a hole in the centre of the wood circle the drilled hole need to be the identical size and not greater the broom handle to guarantee a tight, and for that reason, robust fit.

v. Lower the broom manage to length e.g. 18 inches (450mm). Any old wooden broom or sweeping brush handle or similar sized wooden spindle will do.

vi. Glue the handle to the base with wood glue and wait to dry. The match must be a tight fit to guarantee a excellent reliable and tough finish.

vii. Once the glue is set sandpaper smooth any rough edges and round off the top of the broom take care of with sandpaper.

viii. Varnish or paint any bare wood to finish. In this instance the broom manage used was from an previous brush and the handle was currently finished in brown so it was just a situation of putting a couple of coats on varnish on the base.