Screech Owl Home Strategies: How To Construct A Screech Owl Box

Screech Owl Home Strategies: How To Construct A Screech Owl Box

Give a Screech Owl a House

DIY Birdhouse Plans: Develop A Screech Owl Nest Box

The screech owl is a 12 months round resident in nearly every state across the county. They mostly inhabit woodlands, but are also commonly found in suburban and urban regions.

Like several birds which depend on tree cavities for nesting websites, reduction of habitat helps make it more difficult for screech owls to find ideal nesting internet sites.

Thankfully, screech owls will readily move into a nest box to increase their young, and this screech owl nesting box is an simple undertaking to make from a single 1″ x 12″ x 8′ pine or cedar board.

DIY Birdhouse Plans and Images by the Writer


Factors You Want:
one” x twelve” x 8′ pine, cedar or redwood board

Standard Woodworking Tools & Capabilities

Weather-Resistant Screws Minimize a board into the following components:

Qty Description Dimension
1 – Front (A) 9-one/2″W x sixteen”L
one – Back (B) 11-1/2″W x 24″L
two – Sides (C) 8″W x 19-one/2″L
one – Roof (D) 11-one/2″W x twelve”L
one – Bottom (E) eight”W x eight”L

Layout and the drill the 3″ entrance hole in the front (portion A). Measure up 12″ from the bottom edge, centering the entrance hole across the width of the front section. A hole saw attachment to a drill makes a clean reduce, or use a jig noticed to rough out the opening.

The sides (portion C) are lower on around a 30 degree angle to produce the slope for attaching the roof. From one edge, measure up 18″ and make a mark. From the exact same finish, measure up 16″ and make one more mark. Using a ruler or straight edge, draw a line to connect the marks. Cut along the line to create an angled side piece. The sides are one/4″ shorter than front (element A). When aligned from the bottom edges and joined together, the shorter sides develop a one/4 gap underneath the roof line for air circulation.

Minimize a 30 degree bevel across the leading of the front segment (portion A), to match the slope of the roof and sides.

Lower each and every corner of the bottom area (portion E) at a 45 degree angle, making a little drainage gap. Drill 4 or 5 additional ¼” holes, spaced evenly in the bottom section for further drainage. Attach the back and side assembly to the bottom segment with nails or screws.

Use climate resistant screws or nails to attach 1 side (part C) to the front (component A). This is the fixed side, while the other side is hinged to enable accessibility to the completed nest box for periodic cleansing. Attach the bottom (part E) to the sub-assembly.

Place the partially assembled nest box to the back (component B), leaving room each above and below the nest box assemble for mounting the completed box to a tree or pole. Attach the back to the nest box assembly with nails or screws.

Cut a thirty degree bevel across the back edge of the roof (part D). The bevel matches the angled sides, and makes it possible for the roof to fit snugly towards the back (element B). Attach the roof to the back, side and front sections.

Line up the remaining side (portion C). To create a hinge, safe the side with a single nail or screw driven into every edge — 1 by way of the front (portion A) and one by way of the back (portion B) to type a pivot point. Place the hinge screws immediately across from every other, enabling the door to open simply. Drill and counter sink a screw hole along the center of the bottom edge. A single quick screw will secure the door, however let easy access for cleansing.

Drill a 3″ hole into the center of the entrance guard (component F). Round off the edges with sandpaper, or use a ¼ round over bit to generate a completed edge. Mount the entrance guard on a bias for a visually attractive diamond shape.

Add one” to 2″ of pine shavings to the bottom of the finished nesting box. Screech owls do not bring materials into the box to generate their nests, and will lay their eggs in the shavings. Do not use saw dust or cedar shavings.

Mount the nesting box in between 10′ to 30′ above the ground. Screech owls are tolerant of human exercise, but are recognized to defend their nests so it truly is greatest to location the nesting box in a tree or pole where it can be witnessed but is set back from paths and walkways.

Make a simple cleat for hanging projects such as this screech owl nest box, birdhouses and window boxes. The cleat is made by ripping a piece of stock at a 45 degree angle.

Begin with a piece of wood at least 4 inches broad, and slight shorter than the width of the feeder. When ripped at a 45 degree bevel, a 4 inch broad piece of stock will yield two mirror image cleats about 2 ½” on the broad side.

Tilt the table saw blade to 45 degrees, then set the fence to 2 ½” from the blade to rip the stock into two mirror image pieces, each and every with a 45 degree bevel minimize along a single edge.

1 piece is connected to the back of the venture with the 45 degree angle of the cleat pointing downward and forming an inverted “V” amongst the back of the feeder and the outside surface of the cleat.

Attach the 2nd piece the place you want to hang the feeder, this time with the “V” of the cleat facing upward. Use climate resistant screws, and make sure the cleat is level.
When fitted collectively, the two 45 degree “V”s from every piece lock together to securely hold the feeder in location.

Including a filler strip along the bottom edge of the feeder beneath the cleat on the backside will hold the feeder level upright and plumb. Cut the filler strip to the exact same thickness as the cleats.

For in excess of 35 many years, the Nationwide Wildlife Federation (NWF) has encouraged homeowners, colleges, corporations and municipalities to incorporate the wants of the nearby wildlife into their landscape layout.

So far, the NWF has recognized the efforts of nearly 140,000 folks and organizations who plant native shrubs and plants for meals, cover and areas for raising their youthful, supply consist of a supply of drinking water, and add nesting boxes for cavity nesting birds.

Please go to the NWF internet site for additonal data on their offical Licensed Wildlife Habitat plan


Birdhouse Programs and Nesting Boxes Every single woodworker likes totally free task plans, and each woodworker that enjoys creating wooden birdhouses likes free of charge birdhouse strategies. In excess of time, I developed seve… How to Make a Bluebird Feeder Bluebirds feed on insects rather than seeds, and they are particularly fond of mealworms. This specially developed bluebird feeder is easy to make, and the blue… Make a Butterfly Property for the Garden Generating backyard butterfly homes is an effortless weekend venture that calls for just a handful of pieces of wood and some typical hand equipment. Make butterfly boxes from cedar… Wooden Birdhouses: Three DIY Birdhouse Ideas Constructing wooden birdhouses is a exciting and calming pastime, and the results appear great in the backyard and provide the wild birds with a sheltered place to raise t… How To Create A Screech Owl House The screech owl is a yr round resident in virtually each and every state across the county. They largely inhabit woodlands, but are also generally discovered in suburban a… Make a Wood Duck Nesting Box As their identify implies, wood ducks inhabit ponds and streams in woodland places. Like other cavity nesting birds, wood ducks rely on finding all-natural tree cavit… How To Build a Bluebird House Bluebird Birdhouses: Bluebirds are as useful as they are lovely, preying on huge numbers of beetles, caterpillars, crickets and other bugs. Cavity n… Making Wooden Birdhouses Wooden birdhouses are standard fixtures in many gardens, and avid birders put out birdhouses and bird feeders with the hope of attracting their favored feat… Create a Standard Bluebird Home: Slant Front Style Bluebird houses are easy to develop from cedar, redwood or pine. The dimensions are crucial, specifically the size of the entrance hole (one one/two” for easter… Develop a Deer Feeder to Entice Wildlife Develop this wildlife feeder to appeal to deer, turkeys and other animals into your yard. This feeder box is swift and simple to make from a 1 x twelve pine or cedar b… Feeding Orioles: How To Make an Oriole Feeder Invite these stunning birds to your yard with an Oriole Feeder Orioles feed on fruits and insects rather than seeds, and they will not demonstrate much curiosity i… How To Build A Kestrel Nest Box The American Kestrel is the smallest falcon discovered in North America. Once declining and at chance of extinction, the kestrel population has rebounded thanks in … Attracting Bluebirds into Your Backyard Bird watchers and gardeners consider to attract bluebirds into their yards, the two for their beauty and for the helpful function they play by consuming a lot of various t… Producing Birdhouses from Salvaged Wood This eye-catching birdhouse – or a lot more accurately, this nesting shelf – was created from pieces of salvaged wood. The ends and bottom pieces of the birdhouse have been … How to Build a Bat Home Bat Home Bats are a single of the very best natural defenses against mosquitoes and other flying pests, with each and every bat devouring in excess of 1000 flying insects each evening…