Shishi Odoshi Style: Find out All About Japanese Bamboo Fountain Shishi Odoshi

Shishi Odoshi Style: How To Layout A Japanese Bamboo Fountain (Shishi Odoshi)?

You are about to understand the secrets of designing a lovely Japanese Bamboo Fountain (i.e. Shishi Odoshi). Finding out how to layout your very own Japanese Shishi-Odoshi would support you develop a zen-like distinctive attraction for your indoors or your backyard.

The shishi-odoshi design and style venture would last for about 15 hrs. The design portion would get about ten to 12 hrs, and the set-up would take four to 5 hrs. Considering the attractiveness of this timeless traditional, it is effectively-worth the quantity of time your invest on this venture.

Supplies

You would want two bamboo spouts. Size specs: The initial bamboo Spout would have to be six ft (two meters) prolonged and 2.five inches (60 mm) in diameter. The second bamboo spout would have to be seven.5 ft long and 5 in (120 mm) in diameter).
Plastic Tube – 15 ft (five m) long, .375 in (ten mm) diameter.
Medium-sized submersible pump
Versatile armored pipe to protect pump cable
Electric circuit breaker
A little rock for bamboo to strike on and make “clunking” sound
Equipment

Measuring Tape, Pencil, Market
Sharp Knives
Electric Drill with 3/four in (20 mm) bit.
A Rod to pierce the inner membranes of the bamboo
Drill Hammer
Spade
Garden hosepipe
Coping saw

It is essential to get a high-top quality bamboo that is not having split ends…be careful with razor sharp bamboo edges.

The very best spot to get a great bamboo for your shishi odoshi is nearby backyard center or speciality backyard outlets or estores.

You need to choose a great location for your shishi odoshi – an excellent spot would develop a focal level in your backyard without having above-powering with its presence. Shishi odoshi has several configurable set-ups.

Three of the ideal setup spots for sishi odoshi are:

Setup on your pond (if you have one particular)
Select a decorative water container
Produce a self-containted basin

One of the ideal practices when setting up your shishi odoshi is to cover up the water delivery pipe (the pipe that would carry re-circulating water). The greatest location to hide this pipe is below the rocks or shrubs. Nevertheless, when hiding it, be cautious that the rocks or shrubs are not pinching it, or the water movement would be blocked or fettered resulting in an in-optimum water movement.

Phase one: Produce Constructing Blocks”
Reduce the seven.5 ft bamboo spout in two components: three.five ft lengthy and four ft extended. The component that is three.five ft lengthy is the primary spout and the part that is 4 ft extended is help spout.

Phase two: Develop A “Pass-Thru Window”
For the see-noticed bamboo to pass by means of the major spout, we would need to make a cut on the peripheral regions of major spout.
In buy to facilitate the cuts, we want to make markings on the major spout with pencil and marker. These markings are to be made on both the sides of the principal spout. They are about two.75 inches wide and seven inches deep.
These markings are selected so that when you cut the markings, the base is about five inches above the ground level. Cautiously reduce away the spot with markings on each sides of the main spout with a coping noticed.

Phase three: Produce the Pivot
Cut the six.5 ft lengthy bamboo spout in two pieces: a two ft piece and a 4 ft piece. The 2 ft piece will serve as the Seesaw spout, and the 4 ft piece will serve as water carrying bamboo pipe. Carve a pivot that is eight inches prolonged and 15 mm broad. Area this pivot pin in the center of the “pass-thru window” by drilling a hole in the major spout. Seesaw spout would have to be drilled as nicely so that the pivot pin pass via it. Insert the seesaw spout into the “pass-thru window” of principal spout by way of the pivot.

Phase four: Shape the Support Spout
Employing coping saw and knife, lower a U-shaped assistance on best of the support spout. Pass the water carrying bamboo pipe through this pipe. Minimize the bamboo pipe to be four feet long.

Phase 5: Last Assembly of Shishi Odoshi
Pour water by way of the garden water hose onto the seesaw spout after you are carried out mounting the main spout with seesaw spout pass by way of it. Examine to see if the seesaw motion is as per your expectations. Connect plastic tube with pump and water-carrying bamboo to recirculate water from pond to the bamboo spout. Use armored pipe to conceal the power cable with an electrical circuit breaker.

Creating your own shishi-odoshi is a tough task, albeit the outcomes are quite fulfilling and rewarding.

Obtaining an assembled bamboo water spout would reduce your volume of perform substantially. Here’s an illustration of an assembled shishi odoshi . If you take pleasure in wood-doing work and carving bamboo’s, there is nothing much more fun than making your very own shishi odoshi Japanese bamboo fountain.

A medium sized submersible pump may possibly be identified at your regional house depot or lowe’s. Make certain you know the water capacity of your container when purchasing for the submersible pump.

This squidoo lens is primarily based on the area “Japanese Deer Scarer” of the book, “Outside Water Characteristics: sixteen Easy-To-Build Projects for Your Yard & Garden” by Alan and Gill Bridgewater.

Click on the picture under to open a new window that shows a gorgeous shishi odoshi fountain in action – a video will show the lift and fill movement of bamboo spout.