10 Woodworking Tips and Tricks to Make Your Projects Easier

If you’re an experienced woodworker, you know there are often tips, tricks, and secrets that can make your building projects easier. In this article, we’ve compiled some of the best woodworking tips and tricks from a veteran woodworker. From using blue tape to creating a zero clearance insert, these tips will save you time, frustration, and ensure your woodworking projects turn out perfectly.

Woodworking Tips

1. Taper Board using Blue Tape

Blue tape is a versatile tool in any woodworking shop, and it can help you create a perfect taper on a board. All you need to do is cut a block of wood measuring half an inch wide, tape it to the board you want to be tapered and a straight board. Then, run the taped boards through a table saw, and you’ll get a perfect taper.

2. Tape Multiple Boards Together when Cutting Out Curved Shapes

When cutting out curved shapes and using multiple boards, it’s essential to keep them aligned. Blue tape can help you achieve this by taping the boards together. You can then sand them down together to be exactly the same.

3. Use Blue Tape to Reduce Tear-Out on Table or Miter Saw

Using blue tape directly where the cut will be made on a table saw or miter saw can significantly reduce tear-out. You can also add a temporary backer board and baseboard to minimize tear-out on a miter saw.

4. Prevent Tear-Out on Complex Router Bits Using Zero Clearance Insert

Complex router bits can cause tear-out on your router. However, you can create a zero clearance insert from a sacrificial board. You can also use a clamp to hold it in place eliminating the risk of injury while helping prevent tear-out.

5. Use Fence Clamps for Safe and Efficient Repeated Cuts

Fence clamps are a perfect tool for making repeated cuts on a table saw safely and efficiently. They help hold the material in place, preventing it from sliding and ensuring accurate cuts.

6. Use Blue Tape as a Clamp for Miters or Shapes

Blue tape can be used as a clamp to hold miters or shapes that will connect and return back to themselves. This tape acts as a temporary reference point, allowing you to move to the next step without disturbing the previous one.

7. Know the Shop Temperature and Humidity

Knowing the temperature and humidity in your shop can help you understand wood expansion and contraction, which can ultimately affect your project’s output.

8. Always Leave the Tape Measure Connected to Your Belt or Apron

Instead of taking your tape measure off your belt or apron after every use, leave it so that it retracts automatically. This method will help save time and keep you organized throughout your project.

9. Use a Temporary Fence on a Router Table

When working with a router table, use a temporary fence. It can help prevent your material from slipping away or breaking, especially when working with narrow boards.

10. Recycling and Repurposing Wood Scraps

Instead of throwing away wood scraps, reuse them. You can repurpose them by making cutting boards, picture frames, or even wooden toys for kids. Repurposing wood scraps is an excellent way to add a unique touch to your project while also minimizing waste and saving money.

In conclusion, when it comes to woodworking, small tips and tricks can make a huge difference in your projects’ success. Using simple tools like blue tape and fence clamps can save you time and help you avoid frustration or costly mistakes. Remember to pay attention to humidity and temperature levels in your workshop and to repurpose any scrap wood that would otherwise go to waste. With these tips and tricks, you’re sure to take your woodworking skills to the next level.

Scroll to Top